Description
Cam arm pin with 2 set screws , 1 set needed per cam arm.
Includes: Qty 1 - 5/16 x 2" Dowel
2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs.)
Removing and Installing Cam Arm Pin & Set Screws
You’ll need to remove the pins and cam arm to adjust the weight. Use a 3/16” hex wrench and remove both of the ⅜” set screws, then use a punch to tap out the pin and remove the cam arm. To reinstall the cam arm, tap the pin back into the bore with the rounded end leading and position the cam arm for the pin to slide through. Next install the set screw on one side making it flush with the sheave, tighten the other set screw until it touches the pin then back off the set screw ¼ turn and torque to 50 in/lbs.
