2014 and eariler models

Convert the STM rage 3WCP primary clutches part numbers 3001121 to run high engagement  Qty 1 #7001005 Bolt with M14 Lock washer Qty 1 #1001171 Adjuster Nut Qty 1 #1001172 .060 Nylon Shim Qty 1 #1001173 .030 Nylon Shim Qty 1 #1001630...

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes:  2 -  1001324 Inner bushings for 1/4" pins  2 -...

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes: 2 -  1001732 inner bushings for 8mm pins 2 -  1001328 outer washer...

For use with adjuster nut Sku: 1001717

Turner adjustment nut with 1/4"-20 tapped holes to use a bolt to open the secondary while leaving the adjust nut in place. Must be used with adjuster nut washer Sku: 1001716

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

The 24FDU558 bushing is a replacement bushing for some STM tuner secondary Dual Spring Caps sku: 1001676 applications. 

The 24FDU13 bushing is a replacement bushing for some STM tuner secondary movable sheave applications. 

CANAM X3   **Cam arms and springs sold separately.** Rigid reinforced design for higher horsepower applications. The Rage primary is capable of using any cam arm on the market.  We have incorporated a pin size option for every clutch we...

Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000

This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.

Rebuild Spider Replacement Button for STM Rage 3VL Snowmobile clutches