2023

Convert the STM rage 3WCP primary clutches part numbers 3001121 to run high engagement  Qty 1 #7001005 Bolt with M14 Lock washer Qty 1 #1001171 Adjuster Nut Qty 1 #1001172 .060 Nylon Shim Qty 1 #1001173 .030 Nylon Shim Qty 1 #1001630...

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes:  2 -  1001324 Inner bushings for 1/4" pins  2 -...

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes: 2 -  1001732 inner bushings for 8mm pins 2 -  1001328 outer washer...

A non fixed bushing style arm incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm needs our 1001709 bushings for the 8mm Non fixed .470 wide pin style rage primary 

For use with adjuster nut Sku: 1001717

Turner adjustment nut with 1/4"-20 tapped holes to use a bolt to open the secondary while leaving the adjust nut in place. Must be used with adjuster nut washer Sku: 1001716

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

The 24FDU558 bushing is a replacement bushing for some STM tuner secondary Dual Spring Caps sku: 1001676 applications. 

Replacement fixed sheave and post for Can-Am STM Rage 4 HD DR clutch.  Comes with post # 3001107

The 24FDU13 bushing is a replacement bushing for some STM tuner secondary movable sheave applications. 

CANAM X3   **Cam arms and springs sold separately.** Rigid reinforced design for higher horsepower applications. The Rage primary is capable of using any cam arm on the market.  We have incorporated a pin size option for every clutch we...

Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000