►Cam Arms, Pin Kits and Cam Arm Fasteners
-
3 Arm RA-Series Cam Arm Fastener Kit
$65.00Fastener kit comes with the following hardware:Supplied per arm: 2 - 7 gram tungsten inserts 16 - 1 gram washers 4 - M5x12mm screws 4 - M5x10mm screws 4 - M5x8mm screws 4 - M5x6mm screws 2...$65.00 -
Cam Arm Pin Conversion 1/4"x2.9" for .470" for AXI Series cam arms
$33.00ONLY WORKS IN STM CLUTCHES Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings. Includes: 2 - 1001324 Inner bushings for 1/4" pins 2 -...$33.00 -
Cam Arm Pin Conversion 8mmx2.9" for .470" for AXI Series cam arms
$33.00ONLY WORKS IN STM CLUTCHES Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings. Includes: 2 - 1001732 inner bushings for 8mm pins 2 - 1001328 outer washer...$33.00 -
8mm Non-Fixed Pin Inner Bushing .470 Wide Weight
$10.00Sold individually. These are the bushings that go from the inside of the clutch where the cam arm pin goes through for 8" MM pins with .470 wide weights (.098 shoulder). These are made from billet aluminum$10.00 -
AXI Series Cam Arms - Non Fixed Arms with 1001709 Bushings
$65.00A non fixed bushing style arm incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm needs our 1001709 bushings for the 8mm Non fixed .470 wide pin style rage primary$65.00 -
Non-Fixed Pin Inner Bushing .570 Wide Weight
$12.00Sold individually. These are the bushings that go from the inside of the clutch where the cam arm pin goes through for 5/16" pins with .570 wide weights (.048 shoulder). These are made from billet aluminum$12.00 -
Non-Fixed Pin Outer Bushing .125
$7.00Sold individually. These are the bushings that go from the inside of the clutch where the cam arm pin goes through for 5/16" pins with .570 wide weights (.048 shoulder).$7.00 -
Non-Fixed Pin Inner Bushing .470 Wide Weight
$7.00Sold individually. These are the bushings that go from the inside of the clutch where the cam arm pin goes through for 5/16" pins with .470 wide weights (.098 shoulder). These are made from billet aluminum$7.00 -
$0.75 -
3 Arm Non-Fixed SuperTip Heavy Duty Fastener Kit
$105.00NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for cam arms that utilize bushings to pivot on the pin kit. This fastener kit comes with the following hardware: PER ARM ...$105.00 -
HBRN Series Supertip Notched Cam Arms
$89.00The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Incorporating...$89.00 -
"Wide Primary" Cam Arm Pin 5/16" x 3.14" Non Fixed Pins (Bushing Style Cam Arm Pin)
$9.00ONLY WORKS IN STM WIDE PRIMARY CLUTCHES Includes: 1 - 5/16 x 2 1/2" shoulder bolt 1 - 1/4 - 20 Nyloc nut$9.00