STM Rage Replacement Componenets

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes:  2 -  1001324 Inner bushings for 1/4" pins  2 -...

ONLY WORKS IN STM CLUTCHES  Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings.   Includes: 2 -  1001732 inner bushings for 8mm pins 2 -  1001328 outer washer...

Four arm Quick Change HD spider complete with rollers and buttons.  Works in STM Rage 4 HD primary 8-3/4" diameter or larger. Rebuild kit available: #1001651

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves.  5/8-18...

Pin roller kit for STM HD Rage 4 and 8 arm spider.  This kit includes: 4- 1001634 - .610 Rollers 8- 1001544 Bushings 4- M10 x 28mm Dowel Pin 8- 1001146 .218 Rebuild buttons Works with STM HD Rage 4 & 8 spiders.

Cover screw set for the STM snowmobile and some ATV/UTV Rage 4 and 8 primary clutches.   1/4-20x1 1/4 HHFS set of 8 for non-counter bore cover. Torque to 125 in/lbs.

Pin roller kit for 4 and 8 arm spider.  NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here  This kit includes new buttons, rollers with composite style bushings, pins and washers. Works with all STM Rage 4 & 8...

30-12 bushing cut down and snap ring Fits All STM Primary Movables Sheaves for 1.875" post 35mm HD movable sheave snowmobile. Can Am DR  Can Am HD-DR All Pneumatic movable sheaves   

Sold individually. These are the bushings that go from the outside of the clutch where the cam arm pin goes through for 5/16" pins. 

ONLY WORKS IN STM CLUTCHES  **Updated part # from 26RYCA** Sold each set. 1 pin and bushing set per arm is needed. Only for .570 wide cam arms with 8mm bushings.   Includes: 2 -  1001327 inner bushings for 8mm pins 2 -...

ONLY WORKS IN STM CLUTCHES  **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...