Supertip ATV R-Series Cam Arms

SKU:
1001198
Shipping:
Calculated at Checkout
$277.00

Description

Available in 45 gram base weight with the capability of adding 20 grams per arm for adjustment.  This design allows you the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire.  Each arm can be assembled with tungsten and steel washers that can be used in various combinations to achieve the desired operating RPM.  

 

For use with Rage 6 or Rage 3R clutches, a .060 spider shim (part# 1001204) is required. For standard Rage 3 or Rage 3S clutch, no spider shim is required.

These are bushing style cam arms - non-fixed pin. Comes with bushings installed according to size selected above. Use 1/4" bushings for stock Polaris primary clutch.  

 These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM 

Specify if bushings are required when ordering. 

Our fastener kit comes with the following hardware supplied:

For each arm:

  • 2   -7 gram tungsten inserts
  • 16 - 1 gram washers 
  • 4  -  M5 x 10mm screws  
  • 4  -  M5 x 8mm screws 
  • 4  -  M5 x 6 mm screws 
  • 2  -  set screws 


For each kit:

  • 1 - 222 Loctite® - 1 ml  
  • 1 - 3mm allen wrench 

 

View AllClose

Warranty Information

11.Warranty. Seller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the “Warranty Period”), conform to Seller’s written specifications during normal use and/or operation. Seller’s sole and exclusive obligation, and Buyer’s sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty. Buyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that: (1) the product is not maintained according to Seller’s or the applicable manufacturer’s specifications, (2) the product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair, (3) the non-conformity is caused by casualty, abuse, or improper use, (4) the product is altered other than by Seller or with Seller’s express written approval, (5) the product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement, (6) the product is used, operated, or connected with a third-party good or software not expressly designated by Seller’s documentation and specifications for the product, or (7) any failure results from a design or specification supplied by Buyer. Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and/or improper alteration. Primary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 60 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection. Seller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design. Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final. All warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.
View AllClose