Bearings and Nuts

This is a Gen 2 style sleeved bearing. Only works with sheaves that have previously had this bearing.

Two-way replacement bearing for all ATV Rage Gen 2 Primary Clutches with the 45mm bearings.

Spider nut.

Replacement bearing for Gen 1 ATV Rage Primary Clutch only.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

This retaining washer if for the STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer. Includes lock washer. 

Can only be used with STM Can-Am Rage 6 & 8 primaries with part# 1001000.

Can only be used with STM Polaris and Can-Am ATV Rage 3 primary with bearing part #1001000.

This bolt and nut only works for the style that originally had a bolt and nut in place for the 1st stage rollers.  Sold as 1 pin and nut per assembly. If you have the set screw and pin style please click here for part number 1001028

Bearing housing with bearings for Gen 1 ATV Rage primary clutches.

Can only be used with STM X3 Can-Am Rage 3 part# 3001066 and Rage 4 part# 3001067

Left hand spider nut for opposite rotation machines.