Description
An all new design developed to tame the XP 900 modified turbocharged engine. The new design uses an aggressive ramp radius and light tip to create that low end punch with a smooth rpm transition on top end. This cam arm can be loaded with up to 77 grams with the kit and 83 grams with additional tungsten washers sold separately. This will keep the engine off the rev limiter and harness the power you are making at the proper rpm. They may be too aggressive for a stock XP 900.
Cam Arm kit includes- 1001518 Cam Arm aluminum spacer shims. (2x per arm).
Each arm can be assembled with tungsten multiple inserts and washers used in various combinations to achieve the desired operating rpm. This design allows the option of adding a large quantity of weight to two different areas on both sides of the cam arm to create the shifting characteristics you desire. Our add-on tungsten inserts weigh 7 grams each and steel washers weighing 1 gram each. There is no other arm on the market that allows this wide range of adjustment.
Kit includes 22 grams of hardware to add per arm.
The SUPERTIPS are a drop in piece that requires no modifications to your stock primary.
These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM
