Description
This Rage 3RS is an STM primary designed with the STM Short Post offset NOT allowing it to be used with the stock secondary.
This clutch offers extremely smooth low engagement with improved torque.
New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial take off ratio than our past design. Allows tighter belt deflection and smoother transmission shifting.
Click here to order parts from a clickable parts breakdown -#3001080!
Click here to order parts from a clickable parts breakdown -#3001081!
An affordable replacement for the stock primary clutch. Complete billet design that out performs the existing primary. Using our adjustable SUPERTIP CAM ARMS with the Rage 3 is the perfect recipe for your stock or modified Can Am. These STM clutches will fit under the stock cover with no interference. The Rage 3 is capable of using most cam arms that are available on the market. We incorporate a fixed pin design that pivots the cam arm between two bushings and attaches the cam arm to the pin providing more durability to the cam arm pivot points. All parts are replaceable and stocked.
The cover is designed to use Polaris ATV springs which provides a wide variety of spring rates to choose from.
The Rage 3 comes calibrated with a spring and set of our own adjustable SUPERTIP CAM ARMS.
Includes a new bolt for installation.
Each clutch is assembled and setup to run the BRP OEM belt
Item numbers 1001649 Primary Clutch Vice Holding Tool , 1001653 STM Spider Nut 1-7/16" Extra Deep Socket 6 Point and 1001020 STM Rage 3 & 6 Spider Tool, is required when removing or installing the spider. Works on all STM primary clutches. Sold separately.
When ordering use this guide to help you pick options
Choose Engine HP – Let us know about your bike - Is it naturally aspirated/stock? Big Bore Kit? Does it have a turbo? If you choose turbo-how much boost? This gives us an idea of how to set the weights up. KEEP IN MIND WE CAN ONLY GET YOU CLOSE WITH WEIGHT SET-UP. Everyone's riding style is different so it’s up to the customer to do the fine tuning!
