2019

STM Torsional Spring cover    Fits    All STM Gen 2 snowmobile tuner secondary's that use a torsion spring    All STM Gen 1 ATV Tuner secondary's that use the outer belt deflection adjustment nut...

Tied Clutch Brace Secondary Retaining Washer For m10 Bolt

Primary bolt washer for STM clutch support brace for 1/2" and 14mm bolts 

Bearing Block for the STM Pneumatic Primary Lock Up clutch   

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

Airline tubing for the STM Pneumatic Primary LockUp clutch  Sold in 10 foot sections   

Replacement sheave and post assembly for the STM Can-Am X3 secondary. Comes with sheave and post assembled together and rollers installed. 

Primary clutch retaining bolt for the Can-Am X3 Pneumatic Lockup clutch only.   M14 - 1.5 x 109mm 1/2" thin walled socket required for installation Torque to 80 ft/lbs

Tied clutch brace primary post bearing carrier

Works only with HD style 1st stage cam arms.    Kit includes : 16 - 1 gram washers  3   - 7 gram tungsten washers  6   - M5 x 8mm BHCS 6   - M5 x 10mm BHCS 

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten...

Includes bolt and lock washer.