Rage 3 WCP Replacement Components
3001121
-
$10.00 -
Movable Bushing & Retaining Clip
$12.00This bushing works with the sleeved bearing style ATV clutches and some 35mm snowmobile clutches and STM Primary Assembly Part# 1001603. Includes retaining clip.$12.00 -
ATV Rage 3 & 6 Primary Cover Screw Set
$7.00ATV Rage 3 and 6 primary cover screw set. Includes: 6 - ¼ x 20 x 3/4 BHCS$7.00 -
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$13.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$13.00 -
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$16.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$16.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$52.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$52.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
3 Arm Wide Spider Rebuild Kit w/ Composite Roller Bushings .610 Roller
$96.00Pin roller kit for 3 arm WIDE spider. This kit includes: 6-1001146 .218 Rebuild Buttons 3- 1001634 .610 Rollers 6- 1001544 Roller Bushings 3- M10x36mm Dowel Pins Replaces 1001573$96.00 -
CP Series Clutch and HB Series Cam Arms
$81.00The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm...$81.00 -
$8.00 -
Maverick XDS Turbo & all X3 STM Primary Clutch Retaining Washer & Lock Washer for .750 Post End Bore
$15.00This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.$15.00 -
Can-Am STM Rage ATV Primary Compression Tool M14x1.5
$33.00This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.$33.00