2008

PS type springs

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

Spider retaining nut STM Rage Primary Clutches 

Pin roller kit for 4 and 8 arm spider.  NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here  This kit includes new buttons, rollers with composite style bushings, pins and washers. Works with all STM Rage 4 & 8...

STM ATV helix cover to be used with the PS or KSS style springs. Original part#'s were 1001007 and 1001009 and has been updated to fit both HD and non-HD springs. 

Bushing Retaining Clip.

STM Tuner Secondary Base Tool will sit on your bench and works great for removing and installing the helix and spring along with changing belt deflection.

ATV spider shim .060.   supercedes or replaces C166597.

This is the updated part for part# 1001003.  Lightweight 7075 forged Rage 6 ATV spider. Strength and lightweight in a forged ATV spider for the STM Rage 6 ATV, UTV and Side by Sides. Comes with 1st stage launch arms and 1st stage arm fastener kit...

  The Rage 3P is an STM primary designed with the STM short post that works only with the STM short post secondary.  STM Tuner driven Can-Am short post . This Rage Primary will not work with the stock Secondary clutch  This...

ONLY WORKS IN STM CLUTCHES  **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...

This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in...