2011

STM GEN 1 SECONDARY NOT GEN 1 CANAM'S This is for machines with the clutches on the Right side of the machine only (under your right foot when sitting on the machine).    PLEASE WATCH THE VIDEO BELOW IF YOU NEED HELP CHOOSING YOUR...

Only works with style 1st stage cam arms.   Kit includes: 20 - 1 gram washers  4 -  7 gram tungstens  8 -  M5 x8mm BHCS 8 -  M5 x10mm BHCS 

Works with all 3020 style bushings  ATV Helix Cap bushing press tool, one side is used to press the bushings in with ease while flipping the tool over it is also used to press the bushing out if needed. A very handy tool that makes pressing...

 Wildcat Wet Clutch Model STM Primary Replacement cover 

ATV Movable Sheave Gen 2 comes with: 1 - 1001004 bushing 1-  VH225 retaining clip 3 - 1001028  primary 1st stage roller pin assembly .

New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial takeoff ratio than our past design. Allows tighter belt deflection and smoother transmission shifting. An affordable...

Works with all 3012 style bushings  ATV Primary Movable bushing press tool on one side is used to press the bushings in with ease while flipping the tool over is also used to press the bushing out if needed. A very handy tool that makes pressing...

STM Rage 4 and 8 ATV cover complete with bushing (Part# 1810.59 with retaining clip). 

  This Rage 3RS is an STM primary designed with the STM Short Post offset NOT allowing it to be used with the stock secondary.   This clutch offers extremely smooth low engagement with improved torque. New improved two-way bearing...

ATV Movable Sheave Gen 2 comes with bushing and bushing retainer installed.

Can-Am Tuner Secondary STM Gen 1 Fixed sheave assembly includes sheave and post for the stock or STM Rage 3S primary offset tuners only. includes rollers part# 1001008

ATV Movable Sheave Gen 2 includes bushing, bushing retainer, 1st stage roller pins and set screw installed.