2025

1816 bushing includes VH131 retaining clip

Spider retaining nut STM Rage Primary Clutches 

Nylon spacer goes between the spring and helix cap to prevent wear. Use with KSS style springs and HD compression spring helix cover #1001067 and Cf-Moto secondary clutches 

This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves...

Replacement primary M14 retaining washer and steel wedge lock washer (91074A134) for STM primary clutches purchased on or after 2/25/2020 for Polaris RS1, XP-turbo and Pro all models 

Pin roller kit for STM HD Rage 4 and 8 arm spider.  This kit includes: 4- 1001634 - .610 Rollers 8- 1001544 Bushings 4- M10 x 28mm Dowel Pin 8- 1001146 .218 Rebuild buttons Works with STM HD Rage 4 & 8 spiders.

ATV spider shim .060.   supercedes or replaces C166597.

ATV Primary Fixed Sheave comes with fixed sheave part# 2001260 and post part# 2001272 assembled  This will not work for the STM Rage 3WCP for the 2022 Polaris Ranger XP1000 Northstar Ultimate Trailboos models from febuary 1st, 2022 .

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Cover screw set for the STM snowmobile and some ATV/UTV Rage 4 and 8 primary clutches.   1/4-20x1 1/4 HHFS set of 8 for non-counter bore cover. Torque to 125 in/lbs.

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

Retaining bolt for 2021+ Turbo S and Pro XP tuner.   Includes bolt (part# 98093A566) and Belleville washer (part# 96445K446)