ATV/UTV, Side By Side

Rebuild Spider Replacement Button for STM Rage 3VL Snowmobile clutches 

New improved design offered in a two-way bearing . The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial take off ratio than our past design. Allows for tighter belt deflection.  Part numbers...

Four arm screw-on HD spider complete with rollers and buttons.  Works in STM Rage 4 HD primary 8-3/4" diameter or larger. Rebuild kit available: #1001651

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4  - M5x10mm screws   4  - M5x8mm screws 4  - M5x6mm screws   2  - set screws  ...

Set of 4 rollers.

Supersedes to 2001260 / 2001272       ATV Primary Fixed Sheave comes with fixed sheave part# 2001107 and post part# 2001169 assembled 

Tied clutch brace secondary post bearing carrier.

1st Stage Steel Washers set of 6

Fits 2011-15 Polaris XP 900 Apex/Z-1 Stm Conversion Tuner Secondary's 2016-20 Polaris XP-1000 Apex/Z-1 STM Conversion Tuner Secondary's  2016-20 Arctic Cat 8000 series STM Snowmobile Gen 2 Tuner Secondary's Qty 1 M10x1.25x75mm HHCS Qty 1 M10...

POLARIS RAGE DUAL STAGE BILLET PRIMARY  MUST BE USED WITH A STM TUNER DRIVEN FOR BEST RESULTS! CHECK OUT THE VIDEO BELOW Click here to order parts from a clickable parts breakdown! New improved two-way bearing design. The main...

ATV Gen 1 helix fits our STM Gen 1 ATV secondaries 

Replacement movable sheave includes bushing & snap ring (Part # 1001004)