Bolts

Cover screw set for the STM snowmobile and some ATV/UTV Rage 4 and 8 primary clutches.   1/4-20 x1 HHFS set of 8 for counter bore cover. Torque to 125 in/lbs.

Cover screw set for the STM snowmobile and some ATV/UTV Rage 4 and 8 primary clutches.   1/4-20x1 1/4 HHFS set of 8 for non-counter bore cover. Torque to 125 in/lbs.

STM Snowmobile Primary Bolt

Cover screw set for the STM snowmobile dual stage Rage 6 primary clutches. Torque to 125 in/lbs. Comes with 6 bolts as shown.

This retaining washer is made to fit the STM primary clutch with a 14mm diameter retaining bolt.

The is a clutch cover screw set for the STM single stage Rage 6 primary clutch.  Torque to 125 in/lbs. Includes: 12 - 1/4-20x1" HHFS

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...

STM Snowmobile Primary Bolt for the STM tied clutch support brace only 

This retaining washer is made to fit the STM primary clutch with a 1/2" diameter retaining bolt.

Replacement part M12-1.25x205mm 

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. 

Primary cover bolts for most snowmobile applications.  Torque to 125 in/lbs.