►Cam Arms

Tungsten Washer - 7 grams each      

Available in 50 and 60 gram base with the capability of adding 32 grams per arm for adjustment. This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics...

Qty 1 .570 wide Replacement bushing for the STM Supertip cam arm . will require reaming after press  Fits  STM  Supertip Yamaha Y, YS, YX and YXE style cam arms that fit the stock 8mm pins.  (Ream after press .316 reamer is...

New improved profile that provides a harder up shift than the Original Supertips. We are very pleased with testing results on the race track and chassis Dyno this past season.  We found faster ETs along with an added + 3 hp to the track during Dyno...

The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm...

The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Incorporating...

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit...

  These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM  Our fastener kit comes with the following hardware; Qty supplied per arm  2  -  Tungsten Inserts - 7 grams  16 - Washers - 1 gram...

Replacement 1st stage arm for the STM dual stage clutch.  These Cam Arms are not recommended at RPM ranges above 9000 RPM  Includes: 1 arm 1 new bushing.

Rage 6 & 8 1st stage arm pin set. Includes: 1 - arm pin 2 - steel washers 2 - 8-32 x 1/2" screws

Supertip RN Series "Raised Notch" Notched Drag Race Cam Arms Allows for the use of more spider shimming than our treditional Notched style cam arms. The Notched is raised in the profile to keep the roller deep in the notch when using more spider shims...

Available in 50, 60 and 72 gram increments with the capability of adding 32 grams per arm for adjustment. This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting...