Commander 1000 /Commander Max 1000

STM tuner bolt kit, this is a generic bolt kit that will include all fasteners for the STM Tuner Secondary's listed below.. PN 1001034 replaces PN 1001035, PN 1001036, PN 1001050 and PN 1001082.  FITS  STM Gen 1 and Gen 2 ATV/UTV Tuner...

Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes:  Qty 1 - 5/16 x 2" Dowel                      2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...

Pin roller kit for 3 arm WIDE spider.    This kit includes: 6-1001146  .218 Rebuild Buttons 3- 1001634  .610 Rollers 6- 1001544 Roller Bushings 3- M10x36mm Dowel Pins   Replaces 1001573

The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm...

Adjustment nut thrust washer.

Turner adjustment nut.

Clutch holding tool for STM primary clutches. This tool designed to be put into a vice to be able to hold STM primary clutches for assembly and disassembly. 

The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Incorporating...

2 1/2" load 1 1/4" load

Bushing and retaining clip.

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.