Defender

Bushing and retaining clip.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torquing the clutch bolt. This tool works on all STM Rage 4 & 8...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

Nylon spacer goes between the spring and helix cap to prevent wear. Use with KSS style springs and HD compression spring helix cover #1001067 and Cf-Moto secondary clutches 

These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment.  This design allows the option of adding large quantity of weight to three different areas on both sides...

Bushing

Spider retaining nut STM Rage Primary Clutches 

Spider - pin & roller rebuilt kit for Rage 4 WIDE spider only! Includes: 4 - 1001634  .610 Rollers 8 - 1001544 Bushings 4 - M10 x 36mm Dowel Pins 8 - 1001146 .218 Rebuild Buttons Replaces 1001591  

STM Tuner Secondary Dual Compression Spring  Helix Cover to be used with the KSS style springs with ps , works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete...

Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit...

Pin roller kit for 4 and 8 arm spider.  NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here  This kit includes new buttons, rollers with composite style bushings, pins and washers. Works with all STM Rage 4 & 8...