General XP 1000

First stage cam arm bushing. Updated part number from 0404. Updated from original composite material to aluminum. 

For the 2015-2023 clutch housing cover update on the RZR XP1000 to run our secondary, the clutch housing cover needs to be spaced out for clearance. The kit can be used on 2014-2023 XP1000’s running the 2015-2023 clutch housing cover. This is a...

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit :  1 - 222...

2 1/2" load 1 1/4" load

This part supersedes 2001016     STM Polaris ATV Tuner Secondary Belt removal tool  Thread size M10x1.25 Fits  2014-2020 Polaris XP-1000, 2012-2020 XP 900 tuner secondary's           MH3-12-20

Rage 6 & 8 1st stage arm pin set. Includes: 1 - arm pin 2 - steel washers 2 - 8-32 x 1/2" screws

Replacement aluminum spacers for the 2016 and newer Polaris XP-1000 and 900 clutch housing spacer kit. Pricer is per spacer. 8 Required for a full kit 

Available in 45 gram base weight with the ability of adding 20 grams per arm for adjustment.  This design allows the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire. ...

Nylon spacer goes between the spring and helix cap to prevent wear. Use with KSS style springs and HD compression spring helix cover #1001067 and Cf-Moto secondary clutches 

STM Tuner Secondary Dual Compression Spring  Helix Cover to be used with the KSS style springs with ps , works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete...

This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves. Thread...

Replacements for spiders that came with these HD arms. Arms are sold individually and come with bushing already installed. HD 1st stage M5 fastener kit required with these arms and is sold separately.  These Cam Arms are not recommended at RPM...