Outlander

Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers 4 -  M5x12mm screws    4  - M5x10mm screws   4  - M5x8mm screws 4  - M5x6mm screws 2...

Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000

This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.

Can-Am Tuner Secondary STM Gen 1 Fixed sheave assembly includes sheave and post for the stock or STM Rage 3S primary offset tuners only. THIS IS STM GEN1 Models. Fits Gen1 and Gen2 Machines. Make sure you verify your clutch before ordering...

Replacement sheave for the Can-Am STM Tuner Secondary Gen 1. Includes bushing and bushing retaining clip installed.

PS type springs

2 1/2" load 1 1/4" load

for use in STM Primaries

Pin roller kit for STM HD Rage 4 and 8 arm spider.  This kit includes: 4- 1001634 - .610 Rollers 8- 1001544 Bushings 4- M10 x 28mm Dowel Pin 8- 1001146 .218 Rebuild buttons Works with STM HD Rage 4 & 8 spiders.

Clutch holding tool for STM primary clutches. This tool designed to be put into a vice to be able to hold STM primary clutches for assembly and disassembly. 

CanAm STM Tuner Secondary bolt for secondary assembly part numbers Fits gen one and 2 tuners Not 3001065 (X3, Defender, Maverick Trial or sports!)  M10-1.5x105mm SHCS (Socket Head Cap Screw) 

 ATV spider for the STM Rage 6RS primary.   Comes complete with buttons, pins, rollers, roller bushings, 1st stage arms and pin assembly.  Includes:   1 x  - 1001546  3 x - 1001023  3 x - 1001024  ...