Outlander 850 & 1000 (P-Drive Models)

Replacement roller for the STM snowmobile Gen 1 roller covers, Arctic Cat roller covers and the Gen 1 ATV tuner secondary clutches. 

STM Tuner Secondary roller pin (pull dowel)  Sold individually 

The 2408 bushing is a replacement bushing for some STM tuner secondary movable sheave applications. Use with clip VH175 (purchase separately) per application.

ATV Gen1 helix fits our STM Gen 1 ATV secondary's   If you need a reverse or opposite rotation helix see 99HXXP

Qty 1 .570 wide Replacement bushing for the STM Supertip cam arm . will require reaming after press  Fits  STM  Supertip Yamaha Y, YS, YX and YXE style cam arms that fit the stock 8mm pins.  (Ream after press .316 reamer is...

for use in STM Primaries

Replacement button for the STM Gen 1 ATV tuner secondary and the STM Gen 2 snowmobile tuner secondary. This button replaces the roller.  Sold individually.

STM tuner bolt kit, this is a generic bolt kit that will include all fasteners for the STM Tuner Secondary's listed below.. PN 1001034 replaces PN 1001035, PN 1001036, PN 1001050 and PN 1001082.  FITS  STM Gen 1 and Gen 2 ATV/UTV Tuner...

2 1/2" load 1 1/4" load

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment.  This design allows the option of adding large quantity of weight to three different areas on both sides...