Rage 3 Replacement Components
-
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$18.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$18.00 -
$27.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
3 Arm Wide Spider Rebuild Kit w/ Composite Roller Bushings .610 Roller
$106.00Pin roller kit for 3 arm WIDE spider. This kit includes: 6-1001146 .218 Rebuild Buttons 3- 1001634 .610 Rollers 6- 1001544 Roller Bushings 3- M10x36mm Dowel Pins Replaces 1001573$106.00 -
STM Rage Primary M14-1.5x8.5" Retaining Bolt
$65.00Replacement Primary M14-1.5x 8.5" Retaining Bolt Replacement for 2001165 *85 Ft Lbs Torque *when using retaining washer / lock washer sku: 2001328 the torque spec is 55 ft lbs following the steps on the instructions provided with the...$65.00 -
STM Rage ATV Primary Compression Tool for Polaris
$36.00This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves. Thread...$36.00 -
Primary M14 Retaining Washer & Steel Wedge Lock Washer for Polaris RS1, XP-Turbo and Pro - All Models
$18.00Replacement primary M14 retaining washer and steel wedge lock washer (91074A134) for STM primary clutches purchased on or after 2/25/2020 for Polaris RS1, XP-turbo and Pro all models$18.00 -
$6.00 -
Fixed Sheave & Post Assembly for STM Rage Primary Pro XP, XP Turbo, XP Turbo S, & RS1
$399.00ATV Primary Fixed Sheave comes with fixed sheave part# 2001260 and post part# 2001272 assembled This will not work for the STM Rage 3WCP for the 2022 Polaris Ranger XP1000 Northstar Ultimate Trailboos models from febuary 1st, 2022 .$399.00 -
3 Arm Non-Fixed SuperTip Cam Arm Tuning Fastener Kit
$58.00NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits Supplied per arm: 2 - 7 gram tungsten inserts 16 - 1 gram washers 4 -...$58.00 -
STM Rage Primary Cam Arm Positioning Adjustment Set Screw Set
$13.00These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...$13.00 -
Polaris Rage 3WCP Primary Wide Captured Pin Movable Sheave w/Turned Angle 8.5"
$596.00Replacement movable sheave for the 2001255 Primary includes bushing & snap ring (Part # 1001004)$596.00