Rage 4 WCP Replacement Components
3001122
-
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$14.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$14.00 -
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$18.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$18.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$57.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$57.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
ATV Rage 4 & 8 Cover Screw Set
$8.00Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS$8.00 -
Can-Am & Segway STM Rage ATV Primary Compression Tool M14x1.5
$36.00This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.$36.00 -
Maverick XDS Turbo & all X3 STM Primary Clutch Retaining Washer & Lock Washer for .750 Post End Bore
$17.00This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.$17.00 -
4 Arm Wide Spider Rebuild Kit with Composite Roller Bushings .610 Roller
$141.00Spider - pin & roller rebuilt kit for Rage 4 WIDE spider only! Includes: 4 - 1001634 .610 Rollers 8 - 1001544 Bushings 4 - M10 x 36mm Dowel Pins 8 - 1001146 .218 Rebuild Buttons Replaces 1001591$141.00 -
$33.00 -
STM Primary Fixed Sheave and Post Assy -X3/Defender/Maverick Trail
$399.00STM Primary Fixed Sheave and Post assy. Comes with fixed sheave part# 3001054 and post part# 3001053 assembled. Works with STM Rage 3 and Rage 4 primary clutches for the X3 / Defender and Maverick Trail models.$399.00 -
$6.00 -
STM Rage Primary Cam Arm Positioning Adjustment Set Screw Set
$13.00These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...$13.00