Rage 4WCP Replacement Components
3001122
-
$10.00 -
Movable Bushing & Retaining Clip
$12.00This bushing works with the sleeved bearing style ATV clutches and some 35mm snowmobile clutches and STM Primary Assembly Part# 1001603. Includes retaining clip.$12.00 -
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$13.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$13.00 -
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$16.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$16.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$52.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$52.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
CP Series Clutch and HB Series Cam Arms
$81.00The all New Profile design, HB series cam arms offer ideal heel weight built right into the cam arms for optimal torque and belt pinch still incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm...$81.00 -
$8.00 -
ATV Rage 4 & 8 Cover Screw Set
$8.00Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS$8.00 -
Maverick XDS Turbo & all X3 STM Primary Clutch Retaining Washer & Lock Washer for .750 Post End Bore
$15.00This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.$15.00 -
Can-Am STM Rage ATV Primary Compression Tool M14x1.5
$33.00This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.$33.00 -
AFP Style ATV / UTV STM Supertip Cam Arms
$295.00These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment. This design allows the option of adding large quantity of weight to three different areas on both sides...$295.00