Rage Primary Replacement Components

ONLY WORKS IN STM CLUTCHES  **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...

This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in...

Set of 3 rollers.

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

Set of 3 rollers. These rollers do not come with most ATV, UTV or SXS STM clutches but can be used to keep the 1st stage cam arms engaged further into the shift.

6020-10 bushing

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

This bolt and nut only works for the style that originally had a bolt and nut in place for the 1st stage rollers.  Sold as 1 pin and nut per assembly. If you have the set screw and pin style please click here for part number 1001028

Can only be used with STM Polaris Rage 6 & 8 primaries with part# 1001000.

Bearing housing with bearings for Gen 1 ATV Rage primary clutches.

Set of 3 rollers.

Works only with HD style 1st stage cam arms.    Kit includes : 16 - 1 gram washers  3   - 7 gram tungsten washers  6   - M5 x 8mm BHCS 6   - M5 x 10mm BHCS