ONLY WORKS IN STM CLUTCHES  **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms Non-Fixed Pin only works with cam arms that have a bushing.  Updated from...

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit...

  This Rage 3RS is an STM primary designed with the stock offset allowing it to be used with the stock secondary. To take full advantage of an optimal setup we suggest using the STM Tuner driven Can-Am Long Post along with...

Tuner Belt Deflection shim Set Of 6. For 1.181" dia post Fits All Can Am ATV/UTV STM Tuners Gen 1 and Gen 2. WILL NOT WORK ON X3 or Defender  Polaris ATV Gen 2 Tuners  2015 XP900, 2016 Ace 900, 2015-18 Ranger XP900     MH...

CanAm STM Tuner Secondary bolt for secondary assembly part numbers Fits gen one and 2 tuners Not 3001065 (X3, Defender, Maverick Trial or sports!)  M10-1.5x105mm SHCS (Socket Head Cap Screw) 

Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS 

2 1/2" load 1 1/4" load

ONLY WORKS IN STM CLUTCHES  **Updated part # from 27ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms only for .570 wide cam arms.  Non-Fixed Pin only works with cam arms that have...

Rage 6 & 8 1st stage arm pin set. Includes: 1 - arm pin 2 - steel washers 2 - 8-32 x 1/2" screws

Available in 45 gram base weight with the ability of adding 20 grams per arm for adjustment.  This design allows the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire. ...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torquing the clutch bolt. This tool works on all STM Rage 4 & 8...