Renegade

This is the updated replacement part for STM Rage 3RA Primary clutches only  Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also...

Can-Am Tuner Secondary STM Gen 1 Fixed sheave assembly includes sheave and post for the STM Short post primary offset tuners only. THIS IS STM GEN1 Models. Fits Gen1 and Gen2 Machines. Make sure you...

Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers 4 -  M5x12mm screws    4  - M5x10mm screws   4  - M5x8mm screws 4  - M5x6mm...

Can-Am Tuner Secondary STM Gen 1 Fixed sheave assembly includes sheave and post for the stock or STM Rage 3S primary offset tuners only. THIS IS STM GEN1 Models. Fits Gen1 and Gen2 Machines. Make...

Replacement sheave for the Can-Am STM Tuner Secondary Gen 1. Includes bushing and bushing retaining clip installed.

PS type springs

2 1/2" load 1 1/4" load

for use in STM Primaries

Clutch holding tool for STM primary clutches. This tool designed to be put into a vice to be able to hold STM primary clutches for assembly and disassembly. 

CanAm STM Tuner Secondary bolt for secondary assembly part numbers Fits gen one and 2 tuners Not 3001065 (X3, Defender, Maverick Trial or sports!)  M10-1.5x105mm SHCS (Socket Head Cap Screw) 

 ATV spider for the STM Rage 6RS primary.   Comes complete with buttons, pins, rollers, roller bushings, 1st stage arms and pin assembly.  Includes:   1 x  - 1001546  3 x - 1001023  3 x - 1001024 ...

Pin roller kit for 4 and 8 arm spider.  NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here  This kit includes new buttons, rollers with composite style bushings, pins and...