Renegade

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

PS type springs

Spider retaining nut STM Rage Primary Clutches 

STM ATV helix cover to be used with the PS or KSS style springs. Original part#'s were 1001007 and 1001009 and has been updated to fit both HD and non-HD springs. 

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Can-Am Tuner Secondary STM Gen 2 Fixed sheave assembly includes sheave part# 3001020 and post part# 3001002 for the stock or STM Rage 3S primary offset tuners only. includes rollers part# 1001008

ATV Primary Fixed Sheave Gen 2 contains fixed sheave part# 3001010 and post part# 3001004 assembled. This sheave is only for the 3S or 3P Can-Am options.

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also have a grunt (spider) tool that can be purchased separately...

Replacement sheave for the Can-Am STM Tuner Secondary Gen 2. Includes bushing and bushing retaining clip installed.

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

This can only be used with STM Polaris and Can-Am ATV Rage 3P primaries with bearing part# 1001000.

ATV Movable Sheave Gen 2 includes bushing and snap ring. Works only with Rage 3S and Rage 3P primary clutches.