Renegade

This is the updated part for part# 1001003.  Lightweight 7075 forged Rage 6 ATV spider. Strength and lightweight in a forged ATV spider for the STM Rage 6 ATV, UTV and Side by Sides. Comes with 1st stage launch arms and 1st stage arm fastener kit...

Can-Am Tuner Secondary STM Gen 2 Fixed sheave assembly includes sheave part# 3001020 and post part# 3001002 for the stock or STM Rage 3S primary offset tuners only. includes rollers part# 1001008

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

ATV Primary Fixed Sheave Gen 2 contains fixed sheave part# 3001010 and post part# 3001004 assembled. This sheave is only for the 3S or 3P Can-Am options.

This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in...

Set of 3 rollers.

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also have a grunt (spider) tool that can be purchased separately...

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial takeoff ratio than our past design. Allows tighter belt deflection and smoother transmission shifting. Click here to order...

Can only be used with STM Polaris and Can-Am ATV Rage 3 primary with bearing part #1001000.

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

Can only be used with STM Can-Am Rage 6 & 8 primaries with part# 1001000.