RZR XP-900 & 900S

ONLY WORKS IN STM CLUTCHES  **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...

This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in...

Set of 3 rollers.

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also have a grunt (spider) tool that can be purchased separately...

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

Can only be used with STM Polaris and Can-Am ATV Rage 3 primary with bearing part #1001000.

Can only be used with STM Can-Am Rage 6 & 8 primaries with part# 1001000.

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

This bolt and nut only works for the style that originally had a bolt and nut in place for the 1st stage rollers.  Sold as 1 pin and nut per assembly. If you have the set screw and pin style please click here for part number 1001028

Can only be used with STM Polaris Rage 6 & 8 primaries with part# 1001000.

Set of 3 rollers.