STM Rage Primary Replacement Components
-
Bushing Set of 2 (enough for 1 arm) for Capture Pin Primary Using .570 Wide Cam Arm Weight
$18.00Bushings for capture pin style primary clutches with .570 wide cam arms weights These are sold 2 pieces = enough for 1 cam arm$18.00 -
$27.00 -
Cam Arm Pin & Set Screw Set (Captured)
$6.00Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes: Qty 1 - 5/16 x 2" Dowel 2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...$6.00 -
3 Arm Wide Spider Rebuild Kit w/ Composite Roller Bushings .610 Roller
$106.00Pin roller kit for 3 arm WIDE spider. This kit includes: 6-1001146 .218 Rebuild Buttons 3- 1001634 .610 Rollers 6- 1001544 Roller Bushings 3- M10x36mm Dowel Pins Replaces 1001573$106.00 -
ATV Rage 4 & 8 Cover Screw Set
$8.00Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS$8.00 -
Can-Am & Segway STM Rage ATV Primary Compression Tool M14x1.5
$36.00This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.$36.00 -
Maverick XDS Turbo & all X3 STM Primary Clutch Retaining Washer & Lock Washer for .750 Post End Bore
$17.00This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.$17.00 -
4 Arm Wide Spider Rebuild Kit with Composite Roller Bushings .610 Roller
$141.00Spider - pin & roller rebuilt kit for Rage 4 WIDE spider only! Includes: 4 - 1001634 .610 Rollers 8 - 1001544 Bushings 4 - M10 x 36mm Dowel Pins 8 - 1001146 .218 Rebuild Buttons Replaces 1001591$141.00 -
STM Primary Fixed Sheave and Post Assy -X3/Defender/Maverick Trail
$399.00STM Primary Fixed Sheave and Post assy. Comes with fixed sheave part# 3001054 and post part# 3001053 assembled. Works with STM Rage 3 and Rage 4 primary clutches for the X3 / Defender and Maverick Trail models.$399.00 -
$6.00 -
3 Arm Non-Fixed SuperTip Cam Arm Tuning Fastener Kit
$58.00NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits Supplied per arm: 2 - 7 gram tungsten inserts 16 - 1 gram washers 4 -...$58.00 -
STM Rage Primary Cam Arm Positioning Adjustment Set Screw Set
$13.00These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...$13.00