X3 (all models)

Plunger bearing spacer for all Pneumatic Lockup clutches.

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

Can only be used with STM X3 Can-Am Rage 3 part# 3001066 and Rage 4 part# 3001067

Primary bolt washer for STM clutch support brace for 1/2" and 14mm bolts 

M14 x 1.5 x 7.75" STM Primary Retaining Bolt for X3 DR and DR-HD models  

Replacement sheave and post assembly for the STM Can-Am X3 secondary. Comes with sheave and post assembled together and rollers installed. 

Works with all 1810 style bushings  All STM primary cover Primary cover bushing press tool, one side is used to press the bushings in with ease while flipping the tool over it is also used to press the bushing out if needed. A very handy tool that...

Airline tubing for the STM Pneumatic Primary LockUp clutch  Sold in 10 foot sections   

Tied clutch brace primary post bearing carrier

Primary clutch retaining bolt for the Can-Am X3 Pneumatic Lockup clutch only.   M14 - 1.5 x 109mm 1/2" thin walled socket required for installation Torque to 80 ft/lbs

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten...

Includes bolt and lock washer.