RZR XP-1000

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

Can only be used with STM Polaris and Can-Am ATV Rage 3 primary with bearing part #1001000.

ATV Primary Fixed Sheave Gen 2 comes with post part# 2001178  

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

This bolt and nut only works for the style that originally had a bolt and nut in place for the 1st stage rollers.  Sold as 1 pin and nut per assembly. If you have the set screw and pin style please click here for part number 1001028

This retaining washer is made to fit the STM primary clutch with a 14mm diameter retaining bolt.

Replacement Movable sheave for Polaris STM Gen 2 tuner secondary. Comes with bushing and bushing retaining clip installed, 1.5" bushing Id    

POLARIS RAGE DUAL STAGE BILLET PRIMARY   Click here to order parts from a clickable parts breakdown -#2001240! MUST BE USED WITH THE TUNER DRIVEN FOR BEST RESULTS!  New improved two-way bearing design. The main shaft bearing...

This is the seal ONLY from our spacer kit 2001006 This is the seal only for the spacer kit for your existing 2015-2023 clutch housing cover, cover not included.  

Can only be used with STM Polaris Rage 6 & 8 primaries with part# 1001000.

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...