2017

The 24FDU13 bushing is a replacement bushing for some STM tuner secondary movable sheave applications. 

Includes bolt and lock washer.

Works only with HD style 1st stage cam arms.    Kit includes : 16 - 1 gram washers  3   - 7 gram tungsten washers  6   - M5 x 8mm BHCS 6   - M5 x 10mm BHCS 

Convert the STM rage 4WCP primary clutches part numbers 3001122 to run high engagement  Qty 1 #7001005 Bolt with M14 Lock washer Qty 1 #1001171 Adjuster Nut Qty 1 #1001172 .060 Nylon Shim Qty 1 #1001173 .030 Nylon Shim Qty 1 #1001640 Rage 4...

Four arm screw-on HD spider complete with rollers and buttons.  Works in STM Rage 4 HD primary 8-3/4" diameter or larger. Rebuild kit available: #1001651

Can-Am Tuner Secondary STM Gen 2 Fixed sheave assembly contains sheave part# 3001020 and post part# 3001001 for the STM primary offset tuners. 

Tied clutch brace secondary post bearing carrier.

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

Tied clutch brace secondary post bearing retaining snap ring. 

Set of 4 rollers.

The Newest addition to our Rage3 line of primary clutches The Rage 3RA is an STM primary designed with the stock offset allowing it to be used with the stock secondary. To take full advantage of an optimal setup we suggest using...

Replacement movable sheave includes bushing & snap ring (Part # 1001004)