2024

Pin roller kit for STM HD Rage 4 and 8 arm spider.  This kit includes: 4- 1001634 - .610 Rollers 8- 1001544 Bushings 4- M10 x 28mm Dowel Pin 8- 1001146 .218 Rebuild buttons Works with STM HD Rage 4 & 8 spiders.

ATV spider shim .060.   supercedes or replaces C166597.

POLARIS RAGE BILLET PRIMARY  With the XP900 we experienced 10MPH GAIN OVER THE STOCK CLUTCHES. MUST BE USED WITH THE STM TUNER DRIVEN FOR BEST RESULTS!  Click here to order parts from a clickable parts breakdown -#2001194! New improved...

ATV Primary Fixed Sheave comes with fixed sheave part# 2001260 and post part# 2001272 assembled  This will not work for the STM Rage 3WCP for the 2022 Polaris Ranger XP1000 Northstar Ultimate Trailboos models from febuary 1st, 2022 .

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Cover screw set for the STM snowmobile and some ATV/UTV Rage 4 and 8 primary clutches.   1/4-20x1 1/4 HHFS set of 8 for non-counter bore cover. Torque to 125 in/lbs.

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

Retaining bolt for 2021+ Turbo S and Pro XP tuner.   Includes bolt (part# 98093A566) and Belleville washer (part# 96445K446)

Replaces part #2001226

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the STM primary clutch cover as well to hold it from turning while torquing the clutch bolt. This tool works on all STM Rage 4 &...

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...

STM Torsion spring cover option. Allows the use of a torsion spring with the option of 7 spring load adjustments with one spring. No drilling or modifications to the STM Secondary is needed. Does not come with helix or spring...