Cam arm/Clutch Weights

Set of 2 bushings only **Updated part# from 37 BU Replacement bushings for the STM Supertip weights. This bushing will be required when running the 1/4" pins.  Use on 40, 50, and 60 gram weights for 1/4" pins.

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Fastener kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten...

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

Set of 4 bushings. Replacement bushings for the STM Supertip weights. This bushing will be required when running the ¼" pins.  Use with 40, 50, and 60 gram weights for ¼" pins. Updated part# from 37 BU.

Set of 3. Updated part# from 37BU. Replacement bushings for the STM Supertip weights. This bushing will be required when running the ¼" pins.  Use on 40, 50, and 60 gram weights for ¼" pins.

Replacement bushings for the STM Supertip Kawasaki Teryx cam arm weights. This is an updated part from our original part # 37buy.

1st Stage Steel Washers set of 6

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit :  1 - 222...

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit :  1 - 222...

1st Stage Steel Washers set of 8

Replacement 1st stage arm for the STM dual stage clutch.  These Cam Arms are not recommended at RPM ranges above 9000 RPM  Includes: 1 arm 1 new bushing.

Qty 1 .570 wide Replacement bushing for the STM Supertip cam arm . will require reaming after press  Fits  STM  Supertip Yamaha Y, YS, YX and YXE style cam arms that fit the stock 8mm pins.  (Ream after press .316 reamer is...