Defender

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves.  5/8-18...

Replaces part #2001226

Replacement sheave for the STM Can-Am X3 secondary. Comes with bushing and bushing retaining clip installed  Updated part from original part# 3001049

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

Trans shaft seal shim for the Can-Am Maverick XDS Turbo model STM secondaries.

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...

Works with all 1810 style bushings  All STM primary cover Primary cover bushing press tool, one side is used to press the bushings in with ease while flipping the tool over it is also used to press the bushing out if needed. A very handy tool that...

Can only be used with STM X3 Can-Am Rage 3 part# 3001066 and Rage 4 part# 3001067

Screw-on HD spider shim .03 thick. Fits STM 30, 33 and 35mm primary clutch with 1.875" dia post   Old part number - 25-30-35-HD-SO-03

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

Replacement sheave and post assembly for the STM Can-Am X3 secondary. Comes with sheave and post assembled together and rollers installed.