Defender

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

Bushing

Spider retaining nut STM Rage Primary Clutches 

Spider - pin & roller rebuilt kit for Rage 4 WIDE spider only! Includes: 4 - 1001634  .610 Rollers 8 - 1001544 Bushings 4 - M10 x 36mm Dowel Pins 8 - 1001146 .218 Rebuild Buttons Replaces 1001591  

Nylon spacer goes between the spring and helix cap to prevent wear. Use with KSS style springs and HD compression spring helix cover #1001067 and Cf-Moto secondary clutches 

For use with secondary part#'s 4001050 3001065

ATV spider shim .060.   supercedes or replaces C166597.

STM Primary Fixed Sheave and Post assy. Comes with fixed sheave part# 3001054  and post part# 3001053 assembled.  Works with STM Rage 3 and Rage 4 primary clutches for the X3 / Defender and Maverick Trail models.  

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

Replaces part #2001226