Defender
-
Cam Arm Pin Conversion 1/4"x2.9" for .470" for AXI Series cam arms
$33.00ONLY WORKS IN STM CLUTCHES Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings. Includes: 2 - 1001324 Inner bushings for 1/4" pins 2 -...$33.00 -
Cam Arm Pin Conversion 8mmx2.9" for .470" for AXI Series cam arms
$33.00ONLY WORKS IN STM CLUTCHES Sold each set. 1 pin and bushing set per arm is needed. Only for .470 wide cam arms with 8mm AXI 1001709 bushings. Includes: 2 - 1001732 inner bushings for 8mm pins 2 - 1001328 outer washer...$33.00 -
AXI Series Cam Arms - Non Fixed Arms with 1001709 Bushings
$65.00A non fixed bushing style arm incorporating our signature style of adjustability to offer the most tuning capabilities available. Each arm needs our 1001709 bushings for the 8mm Non fixed .470 wide pin style rage primary$65.00 -
$12.00 -
Tuner Adjuster Nut with 1/4"-20 Tapped Holes
$44.00Turner adjustment nut with 1/4"-20 tapped holes to use a bolt to open the secondary while leaving the adjust nut in place. Must be used with adjuster nut washer Sku: 1001716$44.00 -
STM Dual Spring MAXXX Compression Spring Helix Cover
$110.00STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's. ONLY works on secondary's with a 1.500" diameter post. Comes complete with Qty 1 - 2408 Bushing for 1...$110.00 -
24FDU558 Dual Spring Cover Bushing
$10.00The 24FDU558 bushing is a replacement bushing for some STM tuner secondary Dual Spring Caps sku: 1001676 applications.$10.00 -
24FDU13 Bushing
$15.00The 24FDU13 bushing is a replacement bushing for some STM tuner secondary movable sheave applications.$15.00 -
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$14.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$14.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$57.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$57.00 -
Currently Out of Stock, Please check back again
Raw Secondary Spring 199/370 (STM-Spring)
Venom
$27.00ATV secondary HD clutch spring - RAW 2 1/2" load 199 lbs 1 1/4" load 370 lbs Requires HD spring cap part number 1001009.$27.00 -
STM Tuner Secondary Dual Compression Spring Helix Cover
$94.00STM Tuner Secondary Dual Compression Spring Helix Cover to be used with the KSS style springs with ps , works with HXATV , HXATVG2 and HXSM2S helix's. ONLY works on secondary's with a 1.500" diameter post. Comes complete...$94.00