Defender

ONLY WORKS IN STM CLUTCHES  **Updated part # from 26RYCA** Sold each set. 1 pin and bushing set per arm is needed. Only for .570 wide cam arms with 8mm bushings.   Includes: 2 -  1001327 inner bushings for 8mm pins 2 -...

These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment.  This design allows the option of adding large quantity of weight to three different areas on both sides...

Primary clutch .125 spring shim spacer 

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

Trans shaft seal shim for the Can-Am Maverick XDS Turbo model STM secondaries.

ATV spider shim .060.   supercedes or replaces C166597.

For use with secondary part#'s 4001050 3001065

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...

The spanner tool works with the STM torsional Spring Cover PN1001078    

STM tuner bolt kit, this is a generic bolt kit that will include all fasteners for the STM Tuner Secondary's listed below.. PN 1001034 replaces PN 1001035, PN 1001036, PN 1001471, PN 1001050 and PN 1001082.  FITS  STM Gen 1 and Gen 2 ATV/UTV...

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS