Maverick Sport / Trail / Turbo / Max Turbo

Replaces part #2001226

Replacement sheave for the STM Can-Am X3 secondary. Comes with bushing and bushing retaining clip installed  Updated part from original part# 3001049

The spanner tool works with the STM torsional Spring Cover PN1001078    

Turner adjustment nut For 1001501 Spanner Wrench

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

STM Torsion spring cover option. Allows the use of a torsion spring with the option of 7 spring load adjustments with one spring. No drilling or modifications to the STM Secondary is needed. Does not come with helix or spring...

Trans shaft seal shim for the Can-Am Maverick XDS Turbo model STM secondaries.

These set screws are to adjust the tuck of the primary cam arms in the STM Rage primary clutches with the engagement set screw holes. Works for rage 3, dual stage rage 6, rage 4 and 8 arm clutches that have the cam arm tuck adjustment set...

Screw-on HD spider shim .03 thick. Fits STM 30, 33 and 35mm primary clutch with 1.875" dia post   Old part number - 25-30-35-HD-SO-03

Works with all 1810 style bushings  All STM primary cover Primary cover bushing press tool, one side is used to press the bushings in with ease while flipping the tool over it is also used to press the bushing out if needed. A very handy tool that...

Can only be used with STM X3 Can-Am Rage 3 part# 3001066 and Rage 4 part# 3001067

STM Torsional Spring cover    Fits    All STM Gen 2 snowmobile tuner secondary's that use a torsion spring    All STM Gen 1 ATV Tuner secondary's that use the outer belt deflection adjustment nut...