Rage 3 Replacement Components
2001177 2001209 2001027
-
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$14.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$14.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$57.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$57.00 -
Composite Roller-Bushing Style Pin Roller Kit For STM Rage 3 & 6 Spider
$106.00Pin roller kit for 3 and 6 arm spider. NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here This kit includes new buttons, rollers with composite style bushings, and spider pins. Also used as a replacement for...$106.00 -
Cam Arm 5/16"x2.9" Non-fixed Pin (for 5/16" bushing style cam arms)
$5.00ONLY WORKS IN STM CLUTCHES Includes: 1 - 5/16 x 2 1/4" shoulder bolt 1 - 1/4 - 20 nyloc nut$5.00 -
PATV10 Maroon Spring (2 1/2" load 1 lbs - 1 1/4" load 170 lbs)
EPI Performance
$27.00ATV primary spring - maroon 2 1/2" load 1 lbs 1 1/4" load 170 lbs$27.00 -
Cam Arm Pin Conversion 1/4"x2.9" Pins
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...$33.00 -
Cam Arm Pin Conversion 5/16"x2.9" Fixed Pins for .470 Wide Weights (Set Screw Style Cam Arm Pins)
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms...$33.00 -
Cam Arm Pin Conversion 5/16"x2.9" Non-Fixed Pins for .570 Wide Weights (Bushing Style Cam Arm Pins)
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 27ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms only for .570 wide cam arms. Non-Fixed Pin only works with cam arms that have...$33.00 -
$9.00 -
STM Supertip "R" Series and "P" Series Cam Arm Bushing .470 wide
$27.00Replacement bushings for the STM Supertip R-series weights and the P-series weights. These bushings get pressed in and reamed after installation. Reamers available as part # RMR in sizes .251, .248, .311, & .317. Purchase separately.$27.00 -
.075" Thick Spider Shim
$9.00.075" thick spider shim Fits All STM ATV primary's with a Sleeved 2 way Bearing All STM Primary's with a 1.875" diameter post MH 3-3-20$9.00 -
Supertip ATV P-Series Cam Arms
$330.00Available in 45 gram base weight with the ability of adding 20 grams per arm for adjustment. This design allows the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire. ...$330.00