Rage 8 Replacement Components
-
One ATV Primary Bearing (1001675) Clutch Thrust Washer (2 Required per clutch)
$14.00Sold individually. Clutch requires 2 washers. Works only with bearing 1001675 Required to convert from bearing part# 1001000$14.00 -
2-Way Bearing 47MM (replaces SKU: 1001000)
$57.00This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.$57.00 -
Cam Arm 5/16"x2.9" Non-fixed Pin (for 5/16" bushing style cam arms)
$5.00ONLY WORKS IN STM CLUTCHES Includes: 1 - 5/16 x 2 1/4" shoulder bolt 1 - 1/4 - 20 nyloc nut$5.00 -
STM Primary Clutch Retaining Washer and Lock Washer for 14mm Diameter Bolts
$17.00This retaining washer is made to fit the STM primary clutch with a 14mm diameter retaining bolt.$17.00 -
Maverick XDS Turbo STM Primary Clutch Retaining Washer and lock washer for .850 Post End Bore
$17.00This retaining washer is for the STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer. Includes lock washer.$17.00 -
Cam Arm Pin Conversion 1/4"x2.9" Pins
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...$33.00 -
Cam Arm Pin Conversion 5/16"x2.9" Non-Fixed Pins for .470 Wide Weights (Bushing Style Cam Arm Pins)
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms Non-Fixed Pin only works with cam arms that have a bushing. Updated from...$33.00 -
Cam Arm Pin Conversion 5/16"x2.9" Fixed Pins for .470 Wide Weights (Set Screw Style Cam Arm Pins)
$33.00ONLY WORKS IN STM CLUTCHES **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms...$33.00 -
$9.00 -
$10.00 -
Movable 1st Stage Roller Pin and Nut Assembly
$7.00This bolt and nut only works for the style that originally had a bolt and nut in place for the 1st stage rollers. Sold as 1 pin and nut per assembly. If you have the set screw and pin style please click here for part number 1001028$7.00 -
STM Rage Primary Gen 2 Fixed Sheave and Post Can-Am "Short Post"
$317.00ATV Primary Fixed Sheave Gen 2 contains fixed sheave part# 3001010 and post part# 3001007 assembled. Fits Rage 3, 6 and 8. Works with Rage 3P short post offset (not standard Rage 3P with stock offset) Does not work for standard Rage3S or Rage3P...$317.00