Ranger XP-900 & Crew

STM tuner bolt kit, this is a generic bolt kit that will include all fasteners for the STM Tuner Secondary's listed below.. PN 1001034 replaces PN 1001035, PN 1001036, PN 1001050 and PN 1001082.  FITS  STM Gen 1 and Gen 2 ATV/UTV Tuner...

ONLY WORKS IN STM CLUTCHES  **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms...

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torqueing the clutch bolt. This tool works on all STM Rage 3 & 6...

Replacement bushings for the STM Supertip R-series weights and the P-series weights. These bushings get pressed in and reamed after installation. Reamers available as part # RMR in sizes .251, .248, .311, & .317. Purchase separately.

Spring - yellow  2 1/2" load 165 lbs 1 1/4" load 310 lbs

Spring - pink 2 1/2" load 185 lbs 1 1/4" load 300 lbs

Primary clutch .125 spring shim spacer 

This is a Gen 2 style bearing 47mm non sleeved. Only works with sheaves that have previously had 47mm bearing.

STM Can-Am tuner movable sheave bushing.

Replacement bushing for PN 1001304 Cover  

STM torsional tuner driven orange spring.  Spring Rate: 125/230

Fastner kit comes with the following hardware:Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   - O-rings  8  - M3 x 6 long screws  2  - set screws  Supplied per kit...