RZR XP-1000 / TRAIL & ROCK / HIGHLIFTER / S 1000

ATV spider shim .060.   supercedes or replaces C166597.

Replacement Primary M14-1.5x 8.75" Retaining Bolt  *85 Ft Lbs Torque for STM primary clutches purchased on or after 2/25/2020 for Polaris RS1, XP-turbo and Pro all models  also Polaris Indy STM primary clutch kit SKU: 2001244

NON-FIXED PIN Fastener kit comes with the following hardware: This kit is for Cam Arm that utilize bushings to pivot on the pin kits  Supplied per arm: 2   - 7 gram tungsten inserts  16 - 1 gram washers  4   -...

ONLY WORKS IN STM CLUTCHES  **Updated part # from 29PC** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms with 1/4"...

STM ATV Tuner Secondary Belt Shims Set of 6. Used to set the belt deflection on the STM tuner secondary's with a 1.5" dia post    Fits   2011-14 Polaris XP900 2013 Polaris 900 Jagged X  2014-24 Polaris XP1000  2024...

This design allows the option of adding large quantity of weight to three different areas on both sides of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers that can be used in...

Set of 3 rollers.

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also have a grunt (spider) tool that can be purchased separately...

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

 Bolt Retaining Washer for the STM tuner secondary        Fits 2016-2020 Polaris RZR XP 1000, XP 900 (not XP-Turbo) Tuner Secondary's 2016-2020 Polaris RZR XP 1000, XP 900 Apex/Z-1 Conversion Secondary's 2016-2023 Arctic...

STM HD compression spring helix cover to be used with the KSS style springs, works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete with  Qty 1 - 2408 Bushing for 1...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves.  5/8-18...