RZR XP-Turbo R

Cam arm pin with 2 set screws , 1 set needed per cam arm. Includes:  Qty 1 - 5/16 x 2" Dowel                      2 - 3/8-16 x 3/8 Nylock Set Screw (torque to 50 inch lbs...

Pin roller kit for 3 arm WIDE spider.    This kit includes: 6-1001146  .218 Rebuild Buttons 3- 1001634  .610 Rollers 6- 1001544 Roller Bushings 3- M10x36mm Dowel Pins   Replaces 1001573

A heavy duty tool (also known as the grunt tool) that allows you to remove and install your spider. It will work on the primary clutch cover as well to hold it from turning while torqueing the clutch bolt. This tool works on all STM Rage 3 & 6...

Tuner Secondary clutch for RZR XP Turbo, Turbo-S, and Pro XP All billet design, uses the STM Gen 1 ATV style helixes   Can be used with the stock primary or the billet Rage primary Uses OEM or OEM replacement belts Includes hub insert and...

ONLY WORKS IN STM CLUTCHES  **Updated part # from 28ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins-only for .470 wide cam arms...

Primary clutch .125 spring shim spacer 

Replacement Primary M14-1.5x 8.5" Retaining Bolt Replacement for 2001165  *85 Ft Lbs Torque *when using retaining washer / lock washer sku: 2001328 the torque spec is 55 ft lbs following the steps on the instructions provided with...

Spider retaining nut STM Rage Primary Clutches 

This compression tool will allow you to change weights in your STM primary clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves...

Replacement primary M14 retaining washer and steel wedge lock washer (91074A134) for STM primary clutches purchased on or after 2/25/2020 for Polaris RS1, XP-turbo and Pro all models 

ATV spider shim .060.   supercedes or replaces C166597.

ATV Primary Fixed Sheave comes with fixed sheave part# 2001260 and post part# 2001272 assembled  This will not work for the STM Rage 3WCP for the 2022 Polaris Ranger XP1000 Northstar Ultimate Trailboos models from febuary 1st, 2022 .