2014 and eariler models

  This Rage 3RS is an STM primary designed with the stock offset allowing it to be used with the stock secondary. To take full advantage of an optimal setup we suggest using the STM Tuner driven Can-Am Long Post along with...

Tuner Belt Deflection shim Set Of 6. For 1.181" dia post Fits All Can Am ATV/UTV STM Tuners Gen 1 and Gen 2. WILL NOT WORK ON X3 or Defender  Polaris ATV Gen 2 Tuners  2015 XP900, 2016 Ace 900, 2015-18 Ranger XP900     MH...

CanAm STM Tuner Secondary bolt for secondary assembly part numbers Fits gen one and 2 tuners Not 3001065 (X3, Defender, Maverick Trial or sports!)  M10-1.5x105mm SHCS (Socket Head Cap Screw) 

Rage 8 ATV primary cover screw set. Includes: 8 - ¼-20 x 3/4" BHCS 

ONLY WORKS IN STM CLUTCHES  **Updated part # from 27ACS312** Sold in a per arm set. 1 pin and bushing set per arm is needed. Works with non-fixed style cam arms only for .570 wide cam arms.  Non-Fixed Pin only works with cam arms that have...

Rage 6 & 8 1st stage arm pin set. Includes: 1 - arm pin 2 - steel washers 2 - 8-32 x 1/2" screws

ONLY WORKS IN STM CLUTCHES  **Updated part # from 26RYCA** Sold each set. 1 pin and bushing set per arm is needed. Works with fixed style cam arms that have set screws to fix the arm to the pins. Only for .570 wide cam arms with 8mm bushings...

Bushing and retaining clip.

30-12 bushing cut down and snap ring Fits All STM Primary Movables Sheaves for 1.875" post 35mm HD movable sheave snowmobile. Can Am DR  Can Am HD-DR All Pneumatic movable sheaves   

Available in 45 gram base weight with the ability of adding 20 grams per arm for adjustment.  This design allows the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire. ...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included.