2014 and eariler models

This retaining washer is to fit the .750 post end STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer and lock washer included. 

Nylon spacer goes between the spring and helix cap to prevent wear. Use with KSS style springs and HD compression spring helix cover #1001067 and Cf-Moto secondary clutches 

These are designed for the STM Rage 3VL 2016-2017 RZR XP-Turbo primary clutch. They have the capability adding 32 grams per arm for adjustment.  This design allows the option of adding large quantity of weight to three different areas on both sides...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the m14 x 1.5 thread rod with the plastic cup and tighten the nut to collapse the sheaves.

Bushing

Spider retaining nut STM Rage Primary Clutches 

Pin roller kit for 4 and 8 arm spider.  NOT FOR USE IN 3VL PRIMARY CLUTCHES! for 3vl pin roller kits please Click Here  This kit includes new buttons, rollers with composite style bushings, pins and washers. Works with all STM Rage 4 & 8...

STM ATV helix cover to be used with the PS or KSS style springs. Original part#'s were 1001007 and 1001009 and has been updated to fit both HD and non-HD springs. 

STM Tuner Secondary Dual Compression Spring  Helix Cover to be used with the KSS style springs with ps , works with HXATV , HXATVG2 and HXSM2S helix's.  ONLY works on secondary's with a 1.500" diameter post.    Comes complete...

For use with secondary part#'s 4001050 3001065

STM Primary Fixed Sheave and Post assy. Comes with fixed sheave part# 3001054  and post part# 3001053 assembled.  Works with STM Rage 3 and Rage 4 primary clutches for the X3 / Defender and Maverick Trail models.  

This retaining washer if for the STM primary clutch on the XDS Turbo. Use stock primary bolt with this retaining washer. Includes lock washer.