2016

ATV Primary Fixed Sheave Gen 2 contains fixed sheave part# 3001010 and post part# 3001004 assembled. This sheave is only for the 3S or 3P Can-Am options.

Set of 3 rollers.

This is the updated replacement part for part# 1001015. Made from forged 7075. Comes assembled complete with rollers and buttons.  Rollers and buttons are replaceable.  We also have a grunt (spider) tool that can be purchased separately...

Includes: 1 pin 1/4"x 1.5"  2 set screws 5/16"x3/8"

New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial takeoff ratio than our past design. Allows tighter belt deflection and smoother transmission shifting. Click here to order...

This compression tool will allow you to change weights in your clutch without removing it from the crank. Simply remove the belt and clutch bolt, screw in the thread rod with the plastic cup and tighten the nut to collapse the sheaves.  5/8-18...

Can only be used with STM Polaris and Can-Am ATV Rage 3 primary with bearing part #1001000.

.075" thick spider shim  Fits  All STM ATV primary's with a Sleeved 2 way Bearing  All STM Primary's with a 1.875" diameter post    MH 3-3-20

Replaces part #2001226

Replacement sheave for the Can-Am STM Tuner Secondary Gen 2. Includes bushing and bushing retaining clip installed.

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...

ONLY WORKS IN STM CLUTCHES  Sold in a per arm set. 1 pin and bushing set per arm is needed. Includes: 2 -  1001317 inner bushings for .570 wide weights .048 shoulder bushing 2 -  1001316 outer bushings for .125...